ESD Products
Antistatic Pink Bag

Antistatic Polythene Bags are made of homogenous, non-amine antistatic polythene Antistatic polythene bags will not generate or carry a static charge and so are used to package static sensitive products entering an ESD protected area.

This polythene is available clear. or with a pink tint This polythene is effective at low relative humidities (less than 12%). The antistatic additives used do not effect the film clarity or quality. Antitsatic Bags ETS/AB - specially formulated, containing a blend of two different Organic antistats to render the material permanently static free, meeting the electrostatic requirements of Mil-B-81705C*.

Therefore your products remain static free while enjoying all the protective properties provided by any high quality polyethylene bag. Furthermore, your products can be easily identified without having to remove them from the bag because ETS/ASB is transparent.

Properties

SURFACE.RESISTIVITY

Interior Exterior TriboelectricCharge

VALUES

<10^12 ohm/sq
<10^12 ohm/sq
Nil
Thickness
80micron±10%.
Static Shielding Bags [ ETS/1900 SSB ]

The ETS/1900 SSB "Electroshield " is recognized as the most reliable, readily available & competitively priced static shielding bag in the electronics and telecom industry . This transparent , metalised static shielding bag provides a static safe environment for ESD sensitive electronic devices and components through its multi-layer construction .

  • Metalised Al. Layer provides Faraday cage effect to shield electronics devices from ESD and external electrostatic fields.
  • Multi layer construction offers excellent protection from punctures and tears.
  • Antistatic polythene provides protection against "Tribo-electric charging".
  • Static-dissipative polyester provides excellent physical strength and prevents static generation.
  • Greater than 40% light transmission allows for identification of bag contents.
  • Bags are printed with ESD warning symbol and lot no. coded for QC traceability.
  • Bags are tested to meet the requirements of standard ASTM D257 .
  • Approval - from ERTL (Electronic Regional Test Laboratory), STQC Directorate, Deptt. Of Electronics, Govt. of India

 
Properties

SURFACE.RESISTIVITY

Interior
Exterior
Metalised layer
TriboelectricCharge

VALUES

<10^10 ohm/sq
<10^10 ohm/sq
<10^2 ohm/sq
Nil
Light.Transmission
40 %
Thickness
80micron±10%.
Conductive Grid bag: [ETS/CGB]

The Transparent Conductive Grid bag is recognized as the most reliable, readily available, and competitively priced ESD protective bag in the electronics and telecom industries .

This bag provides "complete ESD protection" for ESD sensitive electronic devices and components as no static charge is generated because of rubbing with the contents because of its " Antistatic -dissipative inner surface ".
The conductive grids are arranged on outer surface to provide "FARADAY CAGE EFFECT" to protect the contents from External Electrostatic fields / charges.

AVAILABILITY :- Standard Width 150, 200, 250, 300, 350, 400 mm
with any Custom Length .

PRINT OPTION :- Printing of customers name and logo on bag also possible.

Properties

SURFACE.RESISTIVITY

Interior Exterior TriboelectricCharge

VALUES

<10^12 ohm/sq
<10^12 ohm/sq
Nil
Thickness
80micron±10%.
Conductive Bag [ETS/CB]

The conductive black bag provides protection to highly sensitive Electronic devices.

Because of highly conductive surface and volume resistivity, it provides FARADEY CAGE EFFECT to protect sensitive contents from external electrostatic fields and charges.
The electrical characteristics of this volume conductive bags are not affected by humidity

AVAILABILITY :- Standard Width 150, 200, 250, 300, 350, 400 mm
with any Custom Length .

PRINT OPTION :- Printing of customers name and logo on bag also possible.

P.S Because of highly conductive inner layer , it is not recommended to keep powered" assemblies ( containing batteries, charged capacitors or other energy sources)
Properties

SURFACE.RESISTIVITY

Interior Exterior TriboelectricCharge

VALUES

<10^6 ohm/sq
<10^6 ohm/sq
Nil
Thickness
80micron±10%.
Antistatic Bubble Bag/Films:[ETS/ABB]

Antistatic Bubble wrap is designed for products which require physical protection in a static control area. Antistatic Bubble packaging is available in rolls, sheets, bags and pouches

Physical Properties:

Bubblewrap is made from multilayer co-extruded LDPE film:
Backing Layer
35 micron co-extruded Antistatic Pink Transperent film .
Top Layer
25 micron co-extruded Antistatic Pink Transperent film .

Bubble size 10 mm

Properties

SURFACE.RESISTIVITY

(both surfaces) - ASTM D257

VALUES

<10^12 ohm/sq
Static Charge Decay Rate (5KV to O volts): <2 seconds (Mil B 81705 C Type II)
Antistatic and Conductive Foam

A.R. ENTERPRISES has extensive range of Antistatic And conductive foams .

Antistatic Foams are available in Hard Expanded polythelene ( EPE) and soft Polyuathene (PU) material .

The Antistatic Foams EPE foams sheets are available in thickness of 2mm , 5 mm and any other thickness as per customers requirement.

Soft Antistatic PU Foams are manufactured as per customers requirement
Properties:

Antistatic Foam

    Surface Resistivity < 10^ 12 ohms/sq

    Colour : Pink

    Density : 30 to 35 kg / cu. mt

Conductive Foam :

Conductive PU and EVA Foams are available in Different thickness as per customers requirement:

Surface Resistivity < 10^6 ohms/sq
Custmized Products
A.R. ENTERPRISES can design , develop and supply ESD packaging needs as per any specific requirement .
Please contact us with your requirement.
Anti Static & Conductive Floor & Table Mats.
Anti-static / Static Dissipative Mat having surface resistivity between 5 × 10^7 ohms/sq to 10^9 ohms/sq conforming to BS 2050-1978, is used in sensitive electronic components / equipment factories.

The Antistatic PVC Flooring are available 3 basic types.

1. Permanent Antistatic PVC Floor Tiles : This product is Permanently Antistatic, as it has a
conductive network formed alongside the plastic molecules.It has pleasing marbled appearance .

2. Three layer Antistatic Mats : This three layer mat consists of conductive layer sandwiched
btwn two outer Antistatic Layers.

3. Two layer Antistatic Mats : Consists of top antistatic Layer and bottom conductive layer for
better grounding.

Standard Dimensions :
Mats : Width 1.5 mtr and 2mt X Running length
Tiles : 600 X 600 mm Thickness 2 , 2.5 , 3 mm
Colour : Almond Brown , Pacific Blue and Grey.

Conductive Mat having Surface Resistivity < 5×10^ 6 Ohm/sq is used in explosive storage and
handling areas like ordinance factories and depots.The conductive mats are available in both
PVC and Rubber material .
Super Economy - ESD / Conductive Ergonomic Production Seating
These Conductive desk height chairs insure a safe, static clear work area. They are equipped with conductive seat cushions, conductive back cushions, conductive fabric or dissipative vinyl, a drag chain or conductive casters .
ESD Footwear : Statguard


A.R. ENTERPRISES's "Statguard" ESD Footwears are made of High quality permanently conductive polymer . "Statguard" is recognized as the most Reliable , Readily available and Competitively priced personnel grounding aid for the electronic, telecom industries and for cleanrooms.

ESD Footwear are required to ground the personnel when they are moving over the antistatic-dissipative floorings ( grounded to ESD ground) to assure effective dissipation of static charges form their bodies. Accumulated static charges , which are the cause of static zaps, are discharged to ESD ground to achieve zero voltage on human body all the times.

" Statguard " ESD Footwear are tested to meet electrical requirements of BS:2050 - 1978 standard and are approved from ERTL (N) ( Elecronic regional test laboratory ) , STQC directorate , deptt. of electronics, govt. of India.

The resistance to ground of these shoes are more than 0.75 M ohms for personnel safety and less than 35 M ohms for ESD safety.

Available in sizes from 6 to 10 (Unisex)

Wrist Strap : Statguard

A.R. ENTERPRISES's " Statguard" Wrist Strap are first line of defense for ESD Control .To protect static Sensitive items from being due to static charges accumulated in operators body because of normal movement, the personnel grounding through Wrist strap & ESD footwear is necessary for effective removal of charges while handling ESD SENSITIVE items

KEY CONSTRUCTION :

* CONSTRUCTION . Multi-strand Copper tinsel wire with insulative coating , sheathed in 2.0 mtr long flexible coiled cord.

* SAFETY . Built in One Megh Ohm (half watt) current limiting resistor to limit fault current less than 0.5mA.

* SKIN CONTACT . Stainless contact plate with conductive elastic for perfect skin contact.

* CONNECTIONS . Quick Connect Imported snap buttons on strap and coiled cord end ( Disconnect force 5 to 25 Newtons ) with Banana Plugs and Aligator Clip designed for positive Connection to the ground.

* COMFORT AND ASTHETICS . Artistically designed , non - irritant , non toxic , comfortable , conductive strap with velcro fastner to suit all sizes.

* SAFETY RESISTENCE . Confirms EOS/ESD std No.1

Home | Profile | Products | Feedback | Query | Contact Us
Copyright© 2006 A.R. Enterprises
Designed and Maintained by Jinex web com